Recorder Menu Screen - JVC BD-X201MS Manual De Instrucciones

RECORDER MENU Screen

The following table identifies and describes the parameters that may be set using the RECORDER screen.
Top half : Appearance on monitor screen
Bottom half : Appearance on LCD display
[ ] : Default setting
RECORDER MENU (1/2) screen
Parameter Possible settings
CHAPTER [MANUAL]
CREATION
CHAPTR [MANU]
SET INTERVAL Every01min
[Every05min]
Every59min
INTERV
AUTO CHAPTER
(REC PAUSE)
ATCHAP
ENCODE UXP (NOT DVD
QUALITY VIDEO)
qUALTY
AUDIO ENCODE NO AUDIO
[DOLBY DIGITAL]
MPEG
A ENC
MPEG
r
REC2
MENU
MENU
All manuals and user guides at all-guides.com
This parameter is used to indicate whether or not chapters are to be created automatically at set
intervals while recording.
AUTO
MANUAL : Chapters are not to be created automatically.
Use this setting when chapters are to be set manually.
AUTO : Chapters are to be created at set intervals during recording.
AUTo
The SET INTERVAL parameter below is used to specify this interval.
This parameter becomes active whenever CHAPTER CREATION has been set to AUTO.
z It is used to set the time interval for automatic chapter creation and is set in units of minutes.
z
1
z
[5]
z
59
OFF Select whether to automatically insert a chapter mark during a recording pause.
OFF : Do not insert a chapter mark.
[ON]
ON : Insert a chapter mark.
oFF
[oN]
For setting the recording quality. Recording quality and time vary with the set values as follows:
(When using a 4.7 GB disc)
XP
Set Value
[SP]
UXP
LP
(NOT DVD VIDEO)
EP
XP
DLP
SP
DEP
LP
UXP
EP
XP
DLP
[SP]
LP
DEP
EP
* Only UXP, XP or SP can be selected when the AUDIO ENCODE item is set to LPCM.
dLP
dEP
This parameter is used to set the encoding format for audio data.
NO AUDIO
LPCM
LPCM
DOLBY DIGITAL : Dolby AC3 encoding (Compressed)
MPEG
oFF
Notes
LPCM
• Only UXP, XP or SP on the ENCODE QUALITY item can be selected when the
[dd]
AUDIO QUALITY item is set to LPCM.
• The MPEG set values can be displayed and selected when the TV TYPE item on
the SYSTEM MENU (2/2) screen is set to PAL.
This button is used to display the RECORDER MENU (2/2) screen.
This button is used to return to the Setup Menu screen.
Description
Recording Time Picture Quality
40 mins High
x
60 mins
120 mins Normal
180 mins
y
240 mins
360 mins Low
y
480 mins
: Do not record audio sound. The recording time will be longer as sound re-
cording is not performed.
: Linear PCM encoding (Non-compressed)
: MPEG encoding (Compressed)
Setup Menu
Upload Size
D1 : NTSC = 720 × 480 dots
PAL = 720 × 576 dots
HalfD1: NTSC = 352 × 480 dots
PAL = 352 × 576 dots
E-73