Premium Ambienti PPC1058D Manual De Uso Y Cuidado página 14

4. Close the lid: Make sure the silicone gasket is seated properly inside the lid. Hold
the lid handle and put the lid on the cooker; rotate the lid counterclockwise
approximately 30 degrees until the lid is aligned with the "CLOSE" mark on the
cooker. (see picture 7)
5. Install the condensation collector. (see picture 8)
6. Adjust the Exhaust Valve to SEAL position before cooking. The Float Valve must be
fully down to properly seal the pot before cooking.(see picture 9)
• If using the Brown function mode, the lid should remain off.
• If using the Slow Cook function mode, put the pressure valve to the VENT
position.
• If using the other cooking function modes, put the valve to the SEAL position.
NOTE: Please note that the Exhaust Valve will be loose when you are not using the
appliance for cooking. It will rock slightly and can turn 360°manually. Once the
Exhaust Valve is in operation and the pressure has built up to its capacity, the Exhaust
Valve will tighten securely, only allowing itself to be turned to the right to vent when
you are facing the front of the cooker. Once all the pressure has released, it will
become loose again.
7
8
9