Festo BAW−HSW−10 Manual Del Usuario página 16

Fitting the pneumatic components
Connect tubing to the pneumatic connections 5 of the
S
actuating cylinder (e.g. with QSML push−in fittings;
see illustration on the next page).
Use, for example, the following components:
S
Fasten the tubing outside the area of movement of the
S
handling module. Secure the tubing with the aid of
cable straps to the holders of the installation kit MKRP
6 (è catalogue specifications).
16
a 5/2−way valve for actuating the actuating cylinder
(basic position: cylinder retracted)
a 5/2−way valve for actuating the semi−rotary drive
on the handling module
optional: additional external exhaust restriction to
further reduce the moving−out speed.
Festo BAW−HSW−... 1009a English