Chapter 7. Troubleshooting - B.A. International Optima OS600L Instrucciones De Uso

Chapter 7. Troubleshooting

7.1 Description of Error Message
7.1.1 Error display screen
Upon occurrence of error, a warning sound is made and then the number subject to the error flickers on error display part of the screen.
Error number(E1~E8) will pop up and keep
flashing depending on each cause.
7.2 Breakdown Description
Error
Display screen does not appear upon turning on the power on.
Motor does not operate upon stepping on the foot switch.
Error code Status
E1 Error on motor sensor
E2 Motor error
E3 Overload error
Error on cooler temperature
E4
(Heat sink temperature error)
E5 Transformer error
E6 Error on circuit and voltage
E7 Error on pedal connection
Inaccurate connection of power cord
Breakdown of power cord
Breakdown of fuse
Inaccurate connection of power cord
Breakdown of foot switch
Cause of error
Defective motor hall sensor,
poor connection
Defective motor and
poor connection
Overload on motor
Cooler being overheated,
breakdown of temperature sensor
Defective transformer, overheating
Defective circuit
Poor pedal connection
Cause of error
14
Remedy
Contact your BA repair centre
Reconnecting and checking the motor
Restart after turning off the power
then leave unit on standby
Restart after turning off the power
then leave unit on standby
Contact your BA repair centre
Contact your BA repair centre
Reconnecting and checking the pedal
Remedy
Checking plug connection
Contact your BA repair centre
Replacing fuse
Checking plug connection
Contact your BA repair centre