Alarm Operation - Lenco CR-335 Manual Del Usuario

Exit setting mode
13. To save all settings, press the TIME SET button or wait for a few
seconds.
Radio Controlled Clock
The unit is able to receive Radio Controlled Clock signal automatically
which will synchronize and displays much accurate time.
Daylight Savings Time (DST)
You may press the TIME ZONE button to suit the daylight savings time of
your area.
1. Press the TIME ZONE button once and the display blinks.
2. Press the + or – button to select the DST.
3. Press the TIME ZONE button again to confirm the selection.
View Year, month and date
At power off mode, you
current setting of year, month and date.
The unit incorporated dual alarm (alarm 1 and alarm 2) for your selection.
When the unit is OFF (power off mode):
Setting the alarm time
1. Press the ALM 1 (ALM 2) SET button once and the alarm Hour
digits blink.
2. Press the +/-
3. Press the ALM 1 (ALM 2) SET button again and the alarm Minute
digits blink.
4. Press the +/-
Set the alarm days
5. Press the ALM 1 (ALM 2) SET button and alarm days blink.
6. Press the +/-
with following meaning :
"1 – 7" ----- All days
can press the MM/DD/YY button to view the

Alarm Operation

button to set alarm hour.
button to set alarm minute.
button to select alarm days, where alarm days display
11