12.1. Setting the alarm
All operating buttons for this setting are located on the bot-
tom of the device. You can set two alarm times.
M
Press the
on the display. This is represented by the bell symbols.
S
Press
to access alarm setting mode. The hours flash.
V
Use
or
S
Press
to confirm. The minutes flash.
V
Use
or
S
Press
to confirm. The minutes display for the length of
the snooze function flashes.
V
Use
or
15, 20, 25, 30 minutes).
S
Then press
The alarm has been set.
12.2. Activating/deactivating the alarm
In time mode, press the
lect the alarm 1 or 2 on the display. This is represented
by the bell symbols.
V
Press
or
lowing symbol is shown on the display:
– Alarm deactivated
– Alarm activated
After confirming the setting, press
mode.
Alternatively you can repeatedly press on top to
the device for 1.5 seconds to select Alarm 1 on,
Alarm 2 on, Alarm 1 & 2 on, all alarms off in a loop.
button once or twice to select alarm 1 or 2
to select the required hour.
to select the required minutes.
to select the required snooze duration (5, 10,
to confirm.
M
to activate or deactivate the alarm. The fol-
button once or twice to se-
M
to return to time
DE
EN
FR
ES
IT
NL
SI
59