Samsung NE59K6851 Serie Manual Del Usuario página 45

Problem Possible cause
The surface The element will cycle on and
unit frequently off to maintain the power
cycles on and setting.
off.
The surface
unit stops
glowing when
changed to a
lower setting.
Scratches or The cooktop is being cleaned
abrasions on improperly.
the cooktop
surface.
Cookware with rough bottoms
was used on the cooktop or
there were coarse particles
(eg. salt or sand) present
between the cookware and
the surface of the cooktop.
Cookware has been slid across
the cooktop surface.
NE59K6851SS_AC_DG68-00872A-00_EN+MES+CFR.indb 45
Solution
This is normal operation, and Brown streaks
not a system failure. Use the or specks.
oven as usual.
Areas of
Scratches are not removable. discoloration
Tiny scratches will become with metallic
less visible in time as a result sheen.
of cleaning. Use ceramic glass
top cleaning cream. Do not
use chemical or corrosive
agents. These agents may
damage the surface of the
"Cracking"
product.
or "popping"
To avoid scratches, use the sound.
recommended cleaning
procedures. Make sure
cookware bottoms are clean
before use, and use cookware
with smooth bottoms.
Problem Possible cause
Boilovers have been cooked
onto the surface.
Mineral deposits from water
and food have been left on
the surface of the cooktop.
This is the sound of the metal
heating and cooling during
the cooking function.
Solution
• Wait until the surface
cools down. Then, use a
scraper to remove those
impurities. Use the blade
scraper to remove soil.
• See the section on the
care and cleaning of the
glass cooktop on page 40.
Remove using a ceramic-
•
glass cooktop cleaning
cream.
• Use cookware with clean,
dry bottoms. Clean the
cooktop with a ceramic
cleaning agent regularly
every week.
This is normal operation, and
not a system failure. Use the
oven as usual.
English 45
12/16/2016 9:37:35 PM