Crosstour CT9500 Manual Del Usuario página 13

Video mode
setting mode
Battery power
No memory card
Burst photo
Mode introduction
The device only supports Micro SD Card with Class U3 or above of 8-64GB capacity, and Micro SD
Card with Class lower than Class U3 may not be able to use it.
Please turn off the power before inserting the card, then open the dust cover, insert the memory
card as shown.
After the memory card is installed correctly, boot into the setting menu and format the memory
card (the original file will be deleted from the memory card), and you are ready to use it.
Video mode
.
The camera automatically enter video mode after boot, press the shooting button to shoot videos.
At this moment, the recording icon on the screen and the recording indicator light on the machine
. flash, then press the shooting button to stop and save the recording.
Press the UP(Wi-Fi) button to turn on the Wi-Fi connection, and you can use your mobile device
.
for Wi-Fi connection.
Press the DOWN(Audio recording)button to select whether to turn the microphone on or off. When
the microphone is on, the icon on the screen is displayed. During the recording, the audio will
be recorded. When the microphone is off, the icon on the screen is displayed. And the audio will
. not be recorded during video recording.
Press the mode button to switch video mode, photo mode, playback mode and setting mode.
.
You can select different recording resolution, exposure compensation and scene mode in setting
mode, or switch video modes such as loop recording, time-lapse and slow recording.
Video (indicator
blinks)
Microphone on
Loop recording
Photo mode
10
Time-lapse
recording
Microphone off
Playback mode
Timer shooting