After Cleaning; Burner Grates - Signature Kitchen Suite UPCG3054ST Manual De Usuario

After Cleaning

Before placing the burner caps and burner heads
back, shake out excess water and then dry them
thoroughly.
replacement
Replace burner heads and caps over the electrodes
on the cooktop, in the correct locations according
to their size. There are one small, two medium, one
large and one extra large burner head and cap.
Medium burner
head and cap
Extra large burner
(center) head and cap
Small burner
head and cap
Large burner
head and cap

Burner Grates

The cooktop has three professional-style grates.
These grates are position-specific.
For maximum stability, these grates should only be
used in their proper position. Because of the varied
burner sizes, the side grates cannot be exchanged
nor can any of the grates be rotated front to back.
Cleaning
Lift grates off when they are cool.
Grates should be cleaned regularly and, of course,
after spills. Wash them in hot, soapy water and rinse
with clean water. When replacing the grates, be
sure they are positioned properly over the burners.
Replace the grates so that continuous arcs are
formed with the center ribs of all three grates.
The grates may be cleaned in a dishwasher.
Do not operate a burner for a long time without
cookware on the grate.
The finish on the grate may chip without cookware to
absorb the heat.
To remove burned-on food, place the grates in a
covered container.
Soak them with 1/4 cup ammonia for several hours.
or overnight. Wash, rinse well and dry.
side grate center grate
Appearance may vary.
The grates may be cleaned
in a dishwasher.
Although they are durable, the grates will gradually
lose their shine, regardless of the best care you can
give them. This is due to their continual exposure to
high temperatures. You will notice this sooner with
lighter colored grates.
nOTE
Do not clean the grates in a self-cleaning oven.
MAINTENANCE 13
side grate