Remote Control Functions; Product Specifications; Package Contents - Jazz Speakers J-9968B Instrucciones De Operación

Remote Control Functions

1. Stereo
2. Pro Logic
3. 5.1 CH
4. Optical
5. Line
6. S_delay
7. C_delay
8. Mode
9. SPCFG
10. Trim
11. Test
1. Stereo : Manual selection of stereo 2-channel audio mode.
2. Pro Logic : Manual selection of Dolby Pro Logic audio mode.
3. 5.1 Ch : Manual selection of Dolby Digital or DTS audio mode.
4. Optical : Manual selection of optical input mode.
5. Line : Manual selection of line input mode.
6. S_Delay : Surround speaker's audio delay when in the Dolby Digital or Dolby Pro
Logic audio modes. Choices are : 0 ms, 5 ms, 10 ms, 15 ms (default : 0 ms).
7. C_Delay : Center speaker audio delay when in the Dolby Digital or Dolby Pro
Logic audio modes. 0-5 ms delay (default : 0 ms)
8. Mode : Selection of audio type. Choices are DTS, Dolby Digital, Dolby Pro Logic,
or Stereo
9. SPCFG : For Dolby Digital and Dolby Pro Logic audio modes only. Distributes
low-bass frequencies, usually reproduced by the subwoofer, to the front, center
and surround speakers. Press the SPCFG button and adjust the levels using the
Volume +/- buttons.
10. Trim : Same as "Test" but uses your audio input signal rather than a test signal.
Adjust each speaker's volume level using the Volume +/- buttons.
11. Test : Auto test individual speaker volume adjustment when in Dolby Digital or
Dolby Pro Logic modes. Press and hold the test button for 2 seconds. As the test
signal travels from channel-to-channel, adjust each speakers volume level using
the Volume +/- buttons.
12. Power : Turns system stand-by power on/off.
13. Mute : Mutes/Restores systems volume.
14. Coaxial : Manual selection of coaxial input mode.
15. Dynamic : Dynamic range adjustment between the loudest and softest sounds
being reproduced. Choices are : 0%, 25%, 50%, 75% (default : 0%).
16. Status : Displays audio mode status.
17. Volume (+/-) : Raises or lowers the systems volume level.
18. Theater /Hall /Stadium : Used in only the Stereo audio mode, selecting Theater,
Hall, or Stadium modes creates various levels of simulated surround sound
effects from a 2-channel stereo audio source.
3
All manuals and user guides at all-guides.com
1. Subwoofer :
Output Power (R.M.S.) : 120 W
12. POWER
Driver : 8" Woofer x 2
Load Impedance : 4 Ohms
13. Mute
Magnetically Shield : Not necessary
Theater
Fuse: AC 250V/3.15A (Local voltage: 220 ~ 240V)
14. Coaxical
AC 125V/ 5A (Local voltage: 100 ~ 120V)
18. Hall
15. Dynamic
AC IN : AC transfermer built-in.
Stadium
2. Satellite :
16. Status
Output Power (R.M.S.) : 40W x 5
Driver : Front SPK. : 2.75" full range x 4 + 1" dome tweeter
17. VOLUME (+/-)
Load Impedance : 8 Ohms
Magnetically Shield : Not necessary
3. Total Power (R.M.S.) : 320 W
4. Frequency Response : 30 Hz ~ 20 kHz
5. Dimension (W x H x D) : Subwoofer - 215 x 485 x 373 mm
6. Operation Environment : 0
7. Remote control :
Battery : (DC 1.5V AAA x 2)
Dimension (W x H x D) : 60 x 15 x 160 mm
* Subwoofer with built-in AC-3/DTS Decoder, Center Speaker, Satellite speakers x 4
* Coaxial Cable
* 3.5 mm to RCA stereo signal cable x 1
* RCA to Bare wire signal cable x 5
* Wrench x 1
* Remote control
* Battery (DC 1.5V AAA x 2)
* User Manual

Product Specifications

Rear SPK. : 2.75" full range x 4 + 1" dome tweeter
Center SPK. : 2.75" full range x 4 + 1" dome tweeter
Center - 656 x 100 x 168 mm
Front - 270 x 1107 x 255 mm
Rear - 270 x 1107 x 255 mm
~ 40

Package Contents

4