Spectrum Brands Pfister Marielle LF 46 Serie Manual Del Usuario página 3

INSTALLATION WITHOUT DECK PLATE
6
6A
6B
6B
6 MOUNTING RINGS INSTALLATION
(For installation using the deck plate, go to step 4.)
If desired, place a small bead of plumber's putty to the underside of Mounting Rings (6A).
Place Mounting Rings (6A) onto Sink Holes (6B).
7
7H
7C
7E
7F
7 SPOUT INSTALLATION
Insert Spout Shank (7C) through Spout Gasket (7D) and Center Sink Hole (7E). From
underneath sink, place Thrust Washer (7F) onto Spout Shank (7C) and tighten with
Mounting Nut (7G). Before final tightening, be sure Spout (7H) is centered and facing
forward.
Caution: Do not over tighten!
6A
6A
6B
7D
7G
ENGLISH
8
8B
8E
8C
8D
8G
8 UNDERBODY INSTALLATION
From underneath, insert Underbody (8A) through end holes (8B), with shank labeled with
Red Tag (8C) on left side. Align Socket (8D) onto Spout Shank (8E), push Underbody
(8A) up until the top of Socket (8D) reaches the Spout Shank Stop (8E). Be careful not to
damage the O-Ring Seal (8F). Place Clip (8G) into Spout Shank Grove (8H) to secure unit.
3
8B
8E
8A
8C
8D
8G
8F
8A
8E
8G 8H
8F