GB
Field of application/Safety/Maintenance
Field of application
- Watering green areas, orchards and gardens
- Draining ponds, trenches, water tanks and contai-
ners.
- In all cases where pressure is needed.
- Clean waters, slightly turbid or dirty.
Warning; these pumps may not pump:
- Liquids containing course materials or stones.
- Flammable, abrasive or gas containing chemicals.
- Contaminated waters from biological treatment or
septic tanks.
Safety Measures
- Children under 16 may not operate the pump
- Persons under the age of 16 may not use the pump.
- A 30 mA protection breaker and earth connection are
required for pump operation.
- Make sure plug and socket are kept away from water
and damp areas.
- Prior to starting the pump, check that the power cable
and plug are in perfect working conditions.
- The power supply must be disconnected before ca-
rrying out any maintenance work.
- In order that damages (room flooding, etc.) caused by
a pump malfunction can be prevented, the user must
take adequate safety measures.
- Damaged power cables must be replaced by the tech-
nical assistance service or qualified personnel.
- The user is liable for damages to the user or third par-
ties resulting from pump operation.
- Please note that we will not be held liable for damages
in the following cases:
- Modifications have been introduced into the
pump.
- Pump repairs have been carried out in non autho-
rised shops;
- Non-original spares have been used.
Recommendations for use
- In order to avoid damage during long periods of ope-
ration, using the suction set incorporating filter and
foot valve is recommended.
- The temperature of the pumped fluid may not exceed
35ºC.
Start up
- Secure the suction pipe properly
- Prime the suction pipe. The pump may not ever
operate dry.
Service and maintenance
For repairs other than the below stated repairs, the
pump must be sent to the Technical Assistance Service.
6