1
NOTE: During operation, your TV
shifts 2.28 in. (58 mm) when retracted
or extended. The wall plate and TV
brackets have built-in adjustments to
help fine-tune your TV placement.
Locate studs. Verify the center of the stud(s) using an awl, a thin nail, or
an edge to edge stud finder. Level the wall plate template
the hole pattern over the CENTERS of your studs, then tape in place.
Min.
16 in. (406 mm)
RETRACTED
EXTENDED
2.28 in. (58 mm)
and align
06
2
06
1 in. (25 mm)
1/2 in.
(13 mm)
Drill pilot holes using a 1/2 in. (13 mm) diameter drill bit then
remove the wall plate template
06
.
06
15