Safety Precautions - Kreg Micro-Pocket KPHA730 El Manual Del Propietario

Table of Contents

Safety Precautions

Pre-Installation/Pre-Assembly
Assembly/Setup
Operation – Drilling Your First
Pocket Hole
Safety Precautions
WARNING Before using a power tool with this product, read and follow the
tool manufacturer's instructions and safety precautions in addition to the safety
precautions below to reduce the risk of serious injury from hazards such as fire,
electric shock, or rotating drill bit.
■
Always wear personal protective equipment recommended by the
manufacturer of the power tool you are using, such as eye, hearing, or
respiratory protection.
■
The drill bit is sharp. Handle with care.
■
Do not allow familiarity gained from frequent use of your tools to replace
safe work practices. A moment of carelessness is sufficient to cause
serious injury.
■
Avoid awkward hand positions where a sudden slip could cause contact
with the rotating bit.
■
When drilling, always ensure that the workpiece is clamped securely. It is
dangerous to hold the workpiece in place by hand.
WARNING Do not operate this tool or any machinery while under the influence
of drugs, alcohol, or medications.
WARNING This product can expose you to chemicals including Acrylonitrile
and other chemicals, which are known to the State of California to cause
cancer and reproductive harm. For more information go to
www.P65Warnings.ca.gov.
2
2 Operation – Drilling and Driving
Pocket-Hole Screws
3
Accessories
4
5
7
9