DeWalt DW970 Manual De Instrucciones página 7

15 MINUTE
FIGURE 1
CHARGER
1 HOUR CHARGER
objects can contact exposed battery terminals. For example, do
not place battery in aprons, pockets, tool boxes, product kit boxes,
drawers, etc. with loose nails, screws, keys, etc. without battery cap.
Without cap in place, battery could short circuit causing fire or burns
or damage to battery.
The RBRC™ Seal
The RBRC™ (Rechargeable Battery Recycling Corpo
ration) Seal on the nickel-cadmium battery (or battery
pack) indicates that the costs to recycle the battery (or
battery pack) at the end of its useful life have already
been paid by D WALT. In some areas, it is illegal to
E
place spent nickel-cadmium batteries in the trash or
municipal solid waste stream and the RBRC program provides an
environmentally conscious alternative.
RBRC in cooperation with D WALT and other battery users, has
E
established programs in the United States to facilitate the
collection of spent nickel-cadmium batteries. Help protect our
environment and conserve natural resources by returning the
spent nickel-cadmium battery to an authorized D
center or to your local retailer for recycling. You may also contact
your local recycling center for information on where to drop off the
spent battery.
All manuals and user guides at all-guides.com
Important Safety Instructions for
Battery Chargers
SAVE THESE INSTRUCTIONS - This manual contains important
safety instructions for D
• Before using battery charger, read all instructions and cautionary
markings on battery charger, battery and product using battery.
CAUTION:To reduce the risk of injury, charge only D
nickel cadmium rechargeable batteries. Other types of batteries
may burst causing personal injury and damage.
1 HOUR
CAUTION: Under certain conditions, with the charger plugged in
CHARGER
to the power supply, the exposed charging contacts inside the
charger can be shorted by foreign material. Foreign materials of
a conductive nature such as, but not limited to, steel wool,
aluminum foil, or any buildup of metallic particles should be kept
away from charger cavities. Always unplug the charger from the
power supply when there is no battery pack in the cavity. Unplug
charger before attempting to clean.
DANGER: 120 volts present at charging terminals. Do not probe
with conductive objects. Danger of electric shock or
electrocution.
WARNING: Don't allow any liquid to get inside charger. Electric
shock may result.
• The charger and battery pack are specifically designed to work
together. DO NOT attempt to charge the battery pack with any
chargers other than the ones in this manual.
• These chargers are not intended for any uses other than charg-
ing D WALT rechargeable batteries. Any other uses may result in
E
risk of fire, electric shock or electrocution.
• To reduce risk of damage to electric plug and cord, pull by plug
rather than cord when disconnecting charger.
WALT service
E
• Make sure cord is located so that it will not be stepped on,
tripped over, or otherwise subjected to damage or stress.
• An extension cord should not be used unless absolutely neces-
sary. Use of improper extension cord could result in risk of fire, elec-
tric shock, or electrocution.
3
WALT battery chargers.
E
WALT
E