Preparation; Before You Begin; Installation Instructions - Thermador TWO30YS Guia De Instalacion

Preparation

The TWO30YS side trim kit is compatible with certain
Thermador Masterpiece
Series conventional ovens when used in a side-by-side
configuration. Please refer to the Combination Guide for
a complete model list and more details.

Before you Begin

Note: It is recommended to change the side trims prior
to installing the oven in the cabinetry in order to
access the side trim screws.
If the appliances are already installed, turn the power
OFF at the service panel. Remove the ovens from the
cabinetry to enable access to side trim screws.
Tools and Parts Needed
T-20 screwdriver
▯
Gloves
▯

Installation Instructions

Removing the control panel
1.
With a T-20 screwdriver, remove the two (2) silver
control panel screws on the underside of the control
panel. Please, do not remove the middle screw. It
holds the control panel together.
and Thermador Professional
®
Parts Included
®
Firmly grasp both sides of the control panel. Rotate
2.
the panel up a few degrees and then lift to disengage
the hooks from the side trims. Rest the control panel
on top of the appliance. Take care not to disconnect or
pinch any wires.
5