Thermador TWO30YS Guia De Instalacion página 6

Removing the side trims
3.
With a T-20 screwdriver, remove the five (5) screws
securing the side trim to each side of the oven; set the
screws aside.
Note: On ovens with side-swing doors, pay special
attention to the three (3) silver machine screws in the
center of the trim, on the hinge-side of the oven. These
screws must be re-installed in their original locations
when the new trim is installed.
4. Installing the side trims
At the top of the replacement trims, the slots will face
up and toward the front of the appliance. Install the
new right and left side trims, securing them with the
five (5) original screws previously removed from each
side.
6
Reinstalling the control panel
5.
Firmly grasp both sides of the control panel. Locate
the hook features of the control panel onto the top of
the side trims. Then rotate the control panel back into
position. Take care not to disconnect or pinch any
wires.
With a T-20 screwdriver, reinstall the two (2) silver
6.
control panel screws on the underside of the control
panel.