Multi-Function Display; Controls - PEUGEOT SCOOTERS TWEET Manual De Utilización

MULTI-FUNCTION DISPLAY

FR
A.Milometer
The tripmeter displays and stores the number of
kilometres travelled by the vehicle. The machine total
kilometres remains in the memory when the battery is
disconnected.
GB
D C
DE
IT
ES
g
NL
B.Tripmeter (TRIP)
The tripmeter displays and stores the number of
kilometers travelled during a given period.
GR
SE
PT
FI
DK
8/18
Changing from the total distance display to the daily
distance display
• With the ignition on, changeover from the total distance
to the daily distance display and inversely is by briefly
pressing the control button (MODE).
Resetting the tripmeter
Resetting the tripmeter is done from the TRIP position.
• The daily counter is reset by a short press on the control
button with the ignition on (SET).
C.Setting the clock
It is only possible to set the time in the total kilometres
position with the machine stationary.
• Turn on the ignition and set the clock.
• Press the control button (several times briefly) until the
figures of the clock flash (SET).
• Set the time by successive pushes on the control
button (MODE).
A short press on the control button makes the first minutes
figure flash (SET).
• Change the minutes by successive pushes on the
A B
control button (MODE).
A short press on the control button makes the second
minutes figure flash (SET).
• Change the minutes by successive pushes on the
control button (MODE).
Pressing the control button allows you to validate the
value (SET).
D.Fuel gauge. Fuel reserve gauge.
When the tank is full:
• All of the fuel level indicator segments are lit.
When the tank is empty, the last segment on the fuel level
indicator and the pump symbol flash (g).
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters

CONTROLS

A
2
B
C
3
D
1
1. Horn switch
2. Dipped lights/Headlights switch
The dipped lights/headlights switch has 3 functions:
A. High beam
B. Dip beam
C.Flashing the lights/Opening of the saddle
3. Indicators switch
To indicate a change of direction, press the switch (D):
• Either to the right.
• Or to the left.
To stop the indicators flashing, press the switch (D).
5
4
4
4. Starter switch
1. Depending on model
1