Publicidad
Idiomas disponibles
Idiomas disponibles
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions. Sensor
is water resistant for water splashes and is designed for general outdoor
use, however, to extend its life place the sensor in an area protected
from direct weather elements. The best location is 1.2 to 2.4 meters
(4 to 8 feet) above the ground with permanent shade and plenty of
fresh air to circulate around the sensor.When placed by hanging hole,
the best distance from the wall is more than 1cm for better ventilation.
Important Placement Guidelines
● The distance between main unit and transmitter should be at least
1.5~2 meters (5~6.5 feet) away from any interfering sources such as
computer monitors or TV sets.
● To maximize wireless range, place units away from large metallic
items, thick walls, metal surfaces, or other objects that may limit
wireless communication. Please do not use other electrical products
such as headphones or speakers operating on the same signal
frequency.
● Neighbors using electrical devices operating on the same signal
frequency can also cause interference.
● Place the main unit more than 1.2 meters away from the power source
for better usage.(including the power source of the product itself or any
other electrical appliances)
● Do not clean any part of the product with benzene, thinner or other
solvent chemicals. When necessary, clean it with a soft cloth.
● Never immerse the product in water. This can cause electrical shock
and damage the product.
● Do not subject the product to extreme force, shock, or fluctuations in
temperature or humidity.
● Do not tamper With the internal components.
● Do not mix new and old batteries or batteries of different types.
● Do not mix alkaline, standard or rechargeable batteries with this
product. Remove the batteries if storing this product for a long period
of time.
PRECAUTIONS
19
Publicidad
