BALDR B0389WST2H2 Manual De Usuario página 13

2. OR when alarm is ringing, press "
function. And the alarm will repeat in 5 minutes. The "
be flashing on screen to indicate the snooze mode. Press any other
button except top button to exit the snooze mode. And the alarm will
restart next day.
3. When alarm rings, the ascending "Bibi"alarm sound will last for 2
minutes if no operation.
PLACEMENT INSTRUCTION
BALDR sensors are sensitive to surrounding environmental conditions.
Proper placement of both the main unit and outdoor sensor are critical
to the accuracy and performance of this product.
Main Unit Placement
Place main unit in a dry area free of dirt and dust. To help ensure an
accurate indoor temperature measurement, be sure to place the Main
unit away from heat sources or vents.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions. Sensor
must be placed outside to observe outdoor conditions. Sensor is water
resistant for water splashes and is designed for general outdoor use,
however, to extend its life place the sensor in an area protected from
direct weather elements. The best location is 4 to 8 feet(1.2 to 2.4
meters) above the ground with permanent shade and plenty of fresh
air to circulate around the sensor.When placed by hanging hole ,the
best distance from the wall is more than 1cm for better ventilation.
Important placement guidelines
●The distance between main unit and transmitter should be at least
5~6.5 feet (1.5~2 meters) away from any interfering sources such
as computer monitors or TV sets.
●To maximize wireless range, place units away from large metallic
items, thick walls, metal surfaces, or other objects that may limit
wireless communication
" button to activate snooze
13
"symbol will