Sony PlayStation 2 SCPH-10171 Manual De Instrucciones página 15

2
Start the supplied DVD Player disc (see page 14 for instructions).
On the startup screen, press the ✕ (enter) button.
3
The Basic Operations screen is displayed.
With the Basic Operations screen displayed, press the ✕ button.
4
The Menu screen is displayed.
5
Select the "Installing DVD Player" option from the Menu screen
and press the ✕ button.
Complete the installation following the on-screen instructions.
Notes
• To view DVD video using the DVD Player installed on a memory card (8MB)
(for PlayStation
PlayStation 2) into a MEMORY CARD slot of the PlayStation
®
• Some DVD remote control functions will not work if you use DVD Player
software earlier than version 2.00. Refer to the PlayStation
instruction manual for details on how to check the version of your DVD Player
software.
For PlayStation
you must install DVD Player (ver 2.00), or later, on a memory card (8MB) (for
PlayStation 2) to activate all DVD remote control functions.
®
• Before installing the DVD Player on the memory card (8MB) (for
PlayStation 2), be sure that at least 2,200KB (2.2MB) of free space is available
®
on the memory card.
• Insert the memory card (8MB) (for PlayStation
slot 1 of the PlayStation
card in MEMORY CARD slot 2.
• Do not remove the memory card (8MB) (for PlayStation
installation is in progress. The installation will be incomplete if the memory
card is removed or the PlayStation
installing.
2), you must insert the memory card (8MB) (for
®
2 consoles of model numbers SCPH-30001 and SCPH-35001
®
2 console. Installation is not possible with the memory
®
2) into MEMORY CARD
®
2 console is turned off or reset while
®
2 console.
®
2 console
®
2) while the
®
US
,
GT
15