Attaching The Cable-Management Arm To The Rack - Dell PowerEdge 15FP Guia De Instalacion

Attaching the Cable-Management Arm to the Rack

Pull the tray far enough out the front of the rack to give yourself sufficient working
1
room at the back.
Working from the back of the rack, remove the orange shipping screw that secures the
2
cable-management arm to the back of the tray. See Figure 1-6 for the screw location.
Swing the free end of the cable-management arm out to the bracket on the end of the
3
left stationary rail, and attach the arm to the bracket with the thumbscrew on the end
of the arm. See Figure 1-7.
F i g u r e 1 - 7 .
left stationary rail
bracket
1-12
I n s t a l l a t i o n G u i d e
A t t a c h i n g t h e C a b l e - M a n a g e m e n t A r m
thumbscrew
cable-management arm