TME MM2040 Guia De Inicio Rapido página 3

Replacing The Battery
The instrument will indicate 'BAT LOW' when the battery
needs changing.
To change the battery, firstly remove the unit from the
outer case. The battery compartment is on the rear of the
instrument. Using a small screwdriver ease back the tab
of the battery compartment. The compartment will then
lift away.
Open Circuit Sensor Detection
An error in the probe is shown on the display by a series
of bars '- - - - -' coupled with the word 'INPUT' at the top
of the display. This indicates either that the probe has an
error or the temperature is out of range.
4
SPECIFICATIONS
Environmental
Ambient operating range
Storage temperature range
Humidity
ELECTRICAL
Measurement Ranges
CENTIGRADE
-50ºC to 150ºC
Accuracy@23ºC
Characterising error
Temperature coefficient
Resolution
Note
Strong RF fields may adversely affect measurement accuracy.
General
WEIGHT
DIMENSIONS
BATTERY
BATTERY LIFE
MM2040
-30°C to 50°C (-21 to 122°F)
-40°C to 60°C (-40 to 140°F)
0 to 70% R.H.
FAHRENHEIT
-58ºF to 302ºF
±0.2ºC
less than 0.05ºC
0.01% of reading/ºC
0.1º autoranging to 1º 1000º
155 gms (5.47 oz)
130 x 70 x 33 mm
PP3
200 Hours
5