Grandstream UCM6301 Guía De Instalación Rápida página 4

CONNECTING UCM6301/6302/6300A/6302A:
UCM6302/6302A Rear view
LAN port FXS ports
Reset
DC 12V
WAN port
Heartbeat port
UCM6302/6302A Front view
UCM6300A Rear view
LAN port
Reset
DC 12V
Heartbeat port
WAN port
UCM6300A Front view
Note: The number of FXS, FXO and USB ports depends on the
UCM6301/6302/6300A/6302A model; among them, UCM6301 supports 1 FXS,
1 FXO and 1 USB port.
1. Connect one end of an RJ-45 Ethernet cable into the WAN port of the
UCM6301/6302/6300A/6302A.
2. Connect the other end of the Ethernet cable into the uplink port of an Ethernet
switch/hub.
3. Connect the 12V DC power adapter into the 12V DC power jack on the back of
the UCM6301/6302/6300A/6302A. Insert the main plug of the power adapter
into a surge-protected power outlet.
4. Wait for the UCM6301/6302/6300A/6302A to boot up. The front LCD display
will show the UCM's hardware information when the boot process is com-
pleted.
5. Once the UCM6301/6302/6300A/6302A is successfully connected to network
via WAN port, pressing the "Home" button will allow you to get the IP address
as well as other information.
6. (Optional) Connect PSTN lines from the wall jack to the FXO ports, connect
analog devices (phone and fax) to the FXS ports (UCM6301/6302/6302A
only).
FXO ports
Ground
SD Card slot
USB ports
Ground
SD Card slot
USB port
~3~
USING THE UCM6301/6302/6300A/6302A
LCD MENU:
1. Press "Settings" key to start browsing menu options.
2. Press "Navigation Key" to browse different menu options. Press "OK" to select
an entry.
3. In the menu option, select "Back" to go back to previous menu.
4. The LCD will return to default display after being idle in menu for longer than
30 seconds.
CONFIGURING THE
UCM6301/6302/6300A/6302A VIA WEB GUI:
1. Connect the computer to the same network as the UCM6301/6302/6300A/6302A.
2. Ensure the UCM6301/6302/6300A/6302A is properly powered on then press
the "Home" button to displays the IP address and other information on the LCD
screen.
3. Open a web browser on the computer and enter the displayed IP address into
the search bar in the following format: http(s)://ipaddress:portnumber
4. Enter admin's username and password to access the configuration menu.
(The factory default username is "admin" while the default random password
can be found on the sticker at the back of the unit).
5. For more detailed information on how to configure SIP extensions, PSTN con-
nections, SIP trunks, and other system settings via the web UI, please down-
load the UCM6301/6302/6300A/6302A user manual here: http://www.grand-
stream.com/support/
Refer to online documents and FAQ for more detailed information:
http://www.grandstream.com/our-products
This product is covered by one or more of the U.S. patents (and any foreign patent counter-
parts thereto) identified at www.cmspatents.com.
~4~