Lighting up the front lamp
1
1. Lamp
CAUTION:
Do not look in the light or see the
source of light directly.
Pull the switch trigger to light up the lamp. The lamp keeps on
lighting while the switch trigger is being pulled. The lamp goes
NOTE: When the tool is overheated, the tool stops auto-
NOTE:
the lamp. Be careful not to scratch the lens of lamp, or
Reversing switch action
A
1
1. Reversing switch lever
CAUTION:
Always check the direction of
rotation before operation.
CAUTION:
Use the reversing switch only after
the tool comes to a complete stop. Changing the direc-
CAUTION:
When not operating the tool, always
set the reversing switch lever to the neutral position.
This tool has a reversing switch to change the direction
of rotation. Depress the reversing switch lever from the
A side for clockwise rotation or from the B side for coun-
terclockwise rotation.
When the reversing switch lever is in the neutral posi-
tion, the switch trigger cannot be pulled.
Speed change
1. Speed change lever
CAUTION:
Always set the speed change lever
fully to the correct position.
damaged.
CAUTION:
Do not use the speed change lever
while the tool is running.
Displayed
Speed
Number
1
2
or "1" for low speed but high torque. Be sure that the
speed change lever is set to the correct position before
operation.
and restart the operation.
B
7 ENGLISH
1
Torque
Applicable
operation
Low
High
ing operation
High
Low
Light loading
operation
-