Publicidad
General safety information
Thank you for choosing a product of SEBSON. Please read the
instructions carefully and keep them for looking up before start-up
this product. A long and failure-free operation can only be
guaranteed if the installation and start-up is done properly. Before
starting up this product, please check for external damage. In
case of visible external damage we immediately dis-advise the
start-up of this product! Please remove all packaging material of
this product before the first start-up.
Please read the safety instructions
necessarily.
This lamp is only suited for indoor-use and
not for outdoor-use!
A minimum distance from 50 cm from the
light to the illuminated surface has to be
complied.
This product may not be disposed of with
household waste. At the end of its useful life,
the product must be returned to a point of
acceptance for the recycling of electric and
electronic device. Please ask your local
municipality for the point of acceptance! As
the devices contain valuable recyclable
materials, they should be sent for recycling,
in order not to harm the environment or
human health from uncontrolled waste
disposal.
Scope of delivery:
1 Downlight
1 GU10 socket
The installation of this light may be done only by a qualified person
according the valid regulations for electrical installation. The
mounting frames are suitable for use with matching LED or
conventional halogen bulbs. This product is marked with the F
symbol and thus can be used on normally flammable surfaces.
The MM symbol denotes that the frames can be mounted on
surfaces of different flammability, e.g. for mounting on furniture.
As an electrical conductor, the product is not suitable for use in
metal constructions on buildings or furniture. Please note that only
light bulbs matching the information in the section "Technical
Data" must be used with this product. Please only use "self-
shielded" halogen light bulbs or LED bulbs with this product. "Cool
beam" or cold light lamps are not suitable for use with this product
due to risk of overheating. The manufacture does not accept any
responsibility for injuries or damage resulting from improper use
of the lamp! Any other use than the description may result in
damage to the product. So the dangers are such as electric shock,
short circuit, fire etc. Please read the safety instructions
necessarily!
Please
make
objects/materials are kept near the lamp. This product must never
be used in rooms where flammable gases, vapors or dusts.
Before start-up this product please make sure that the product is
protected from heavy dirt, dampness and warming! In order that
the warranty claim does not expire please use only the supplied
items. Repairs may only be done by an expert and only by using
sure
that
no
flammable
SEBSON - Sebastian Sonntag - Gernotstr.17 - 44319 Dortmund Germany - www.sebson.de
original spare parts! In commercial institutions, the accident
prevention regulations of the professional trade association for
electrical equipment and facilities must be adhered to. Caution:
In case of damages or contact with water turn off this product
immediately without tension and make sure that a restart is no
longer possible! Do not cover the light with heat insulating
materials. Please set up the light beam of the light never directly
at people or animals to prevent fire damage or eyes damage and
avoid looking directly into the light source. Please keep this
product away from children. Caution: The packaging contains
small parts that can be swallowed by children! Before installing
please make sure that the circuit is interrupted through the circuit
breaker of the fuse box! Check by using a voltage tester if the line
is de-energized. For installation, the work on the mains voltage is
required. Please remove the associated mains fuse or deactivate
the switch fuse! Make sure that the current circuit will not closed
during the installation!
Cleaning
Caution: Before start cleaning the light please interrupt the
current circuit by switching off the circuit breaker or unscrew the
fuse. Leave the light to cool down at least 10 minutes before
start cleaning! This product is not waterproof. We recommend
for cleaning a soft dry tissue. Please do not use solvent-
containing cleaner for cleaning the lamp. Please avoid in
cleaning of the lamp the wearing of metallic or conductive
jewelry such as bracelets, necklaces, rings etc.
CE Declaration of Conformity
This product has been prepared according to the listed below
guidelines.
RoHS guidline 2011/65/EU
Allgemeine Sicherheitshinweise
Vielen Dank, dass Sie sich für ein Produkt der Marke
SEBSON entschieden haben. Vor der Inbetriebnahme lesen
Sie sich bitte die Anleitung zur Montage gründlich durch und
bewahren Sie diese zum Nachschlagen auf! Ein langer und
störungsfreier Betrieb kann nur gewährleistet werden, wenn
die Installation und die Inbetriebnahme sachgerecht erfolgt
ist. Vor der Inbetriebnahme dieses Produkts prüfen Sie
dieses bitte auf äußerliche Schäden. Bei sichtbaren
äußerlichen Beschädigungen wird von der Inbetriebnahme
dringend
abgeraten!
Inbetriebnahme sämtliche Verpackungsmaterialien.
Bitte beachten Sie vor der Montage der
Leuchte unbedingt die
Sicherheitshinweise und technischen
Angaben!
Bitte installieren Sie den Einbaurahmen
nur im Innenbereich. Für den
Außenbereich ist dieses Produkt nicht
geeignet.
Ein Abstand von 50 cm sollte mindestens
zwischen der Leuchte und der Fläche, die
ausgeleuchtet werden soll, eingehalten
werden.
Entfernen
Sie
bitte
vor
der
4
Publicidad
