Philips HR7950 Manual Del Usuario página 4

Never stick or use your fingers
•
or an object (for example, a
spatula) to push ingredients into
the feeding tube of the food
processor or the meat mincer
hopper while the appliance is
running. Use only the provided
pusher for the food processor
or meat mincer.
Be careful if hot liquid is
•
poured into the bowl, food
processor or blender as it can
be ejected out of the appliance
due to a sudden steaming.
Never unlock the kitchen
•
machine's arm when other
accessories (such as food
processor, blender, mill or
meat mincer, etc) are attached.
Never attach and use more
•
than one tool or accessory
on the kitchen machine at the
same time.
This appliance is intended for
•
household use only.
Caution
Always switch off and
•
unplug the appliance if it is
left unattended, and before
assembling, disassembling,
cleaning and changing
accessories, or approaching
parts that move in use.
EN
10
In order to avoid a hazard due
•
to inadvertent resetting of the
thermal cut-out, this appliance
must not be supplied through an
external switching device, such
as a timer, or connected to a
circuit that is regularly switched
on and off by the utility.
Always switch off the appliance
•
by turning the knob to 0
position.
Always wait until the moving
•
parts stop running after
switching off, and then unplug
the appliance before lifting the
arm of the stand, or opening,
disassembling or removing the
parts of any of the accessories
from the stand.
Do not exceed the maximum
•
capacity as indicated on the
accessories (bowl, jar, mill).
Follow the quantities, processing
time and speed when using
the kitchen machine tools, as
indicated in the user manual.
Thoroughly clean the parts
•
that come into contact with
food before you use the
appliance for the first time.
Refer to the instructions and
table for cleaning given in the
user manual.