Publicidad
Idiomas disponibles
Idiomas disponibles
ARCS Blue
Upgradable readers
Installation instructions
Procedure to add the biometric (SE6) or 125 kHz module (SE8 / SE8M) or QR Code module (SE9)
STid guarantees the good working order, compliance, technical support and after-sales service of the readers and modules (SE6, SE8, SE8M and SE9) that
are installed as explained below, without any internal or external modifications.
- Check that the cable length that comes out of the module does not exceed 0.39 in. If
it does, push the excess cable into the module housing.
- Connect the cable of the module to connector J9. You should not have a loop
- Insert the module into the reader slot (until you hear a "click" for SE6)
- Cut the base as shown in the drawing
- Place the "reader + module" on the base (i.e. Mounting), use the 2 screws provided
(3)
with the module
.
- Read only readers: Activate the module with configuration card (SCB or OCB).
passage of
the module
cable
(3)
(3)
(1)
SE8 compatible with: HID Prox / EM4x02 / EM4x50 / Nedap.
SE8M compatible with: HID Prox / EM4x02 / EM4x50 / AWID / ioProx / Indala.
Minimum reading distance depending on the size of the QR Code
© STid - 20 PA des Pradeaux FR13850 Gréasque - NI1114C08- Page 5 sur 18 - Ed. 08/12/2020
STid reserves the right to make change without notice, for the purpose of product improvement.
(2)
.
Option: Reinforcement plate to rigidify the assembly:
Standard/keyboard reader + module SE6v2: Réf. SE7-ARC-DE-02.
Touch screen reader + module SE6v2: Réf. SE7-ARC-F-02.
Standard/keyboard reader + module SE9: Ref. TOLE-ARC-AQ-BQ-01.
Touch screen reader + module SE9: Ref. TOLE-ARC-CQ-01.
Slot for the
QR Code
Distance
mm
inch
mm
inch
10x10 0.39x0.39
26
1.02
15x15 0.59x0.59
36
1.42
20x20 0.79x0.79
44
1.73
25x25 0.98x0.98
59
2.32
30x30 1.18x1.18
77
3.03
ARCS Blue
Lecteurs évolutifs
Notice d'installation
(1)
.
SE8 / SE8M
SE9
ARCS Blue
Lectores escalables
Procedimiento de instalación
conforme con NOM-024 -SCFI-2013
(2)
To pass the module cable into
the support, cut out the preformed
part of the support.
Code format read:
- QR Code
- Aztec
- Data Matrix
- Code 128
US
FR
ES
Screw
Publicidad
