Publicidad
Idiomas disponibles
Idiomas disponibles
BATHROOM FAN HEATER
100000139 META
We thank you for the purchase of this Profile product.
Caution: It is important that you read this manual before
using the product Then keep this manual in a safe place.
Technical information
Mains voltage: 220V – 240V AC (50Hz)
2 positions: 1000W-2000W
For spaces of max. 20m²
Ventilation function
With adjustable, built-in thermostat
With towel bar
With wall fastening
With protection against overheating
IP21
Connection
The heater is supplied with a plug. Never use the
appliance with a damaged cable and/or plug, after the
heater has not been working properly, or if it has been
damaged in whatever way.
The replacement of a cable and/or socket plug may only
be done by a qualified professional who is familiar with
the applicable requirements.
Installation
Respect the minimum distance from objects!
Wall fastening:
Figure 1: Drill 2 holes in the wall and insert the
supplied plugs into the drill holes.
Figure 2: Screw on the heating element using the
supplied screws and slide the heater over the
heating element.
Figure 3: Slide the end of the towel bar (B) into the
slot provided (A) and attach the stem using the
screw (A). Attach the towel rail using the supplied
screw (C).
EN - 1
Picture 3
Publicidad
