●● Temperature for silk, wool. (Minimum temperature for ironing with steam)
●●● Temperature for cotton.
Max Temperature for linen.
- If garment has various kinds of fibres, select the temperature for the fibre
that requires the lowest temperature. (For example, select the temperature for
polyester for an article made out of 60% polyester and 40% cotton).
Wait until the pilot light (B) has gone out which will indicate that the appliance
has reached an adequate temperature.
- Press and hold the steam button (C) for 10 seconds
During use the pilot light (B) will automatically flash on and off, thus indicating
that the heating elements are operating in order to maintain the desired
temperature.
Dry ironing:
- The appliance has a steam and temperature control (E) which when set to the
MIN position allows dry ironing (no steam).
Steam Ironing:
- It is possible to iron with steam whenever the deposit is filled with water and
the adequate temperature is selected.
Steam flow control:
- The appliance has a steam and temperature control (E) used to regulate the
steam flow.
Vertical steaming
It is possible to iron hanging curtains, items of clothing on his hanger, etc. To do
so, follow the instructions:
Select the maximum temperature of the iron, while turning the temperature
regulator of the iron in a clockwise direction.
- Move the iron in a top to bottom direction while pressing the steam control (
C ). Important: for cotton and linen, its recommended to put the iron base in
contact with the material. For other more delicated fibres, it's recommended to
keep the iron base at some centimetres of distance.
Once you have finished using the appliance:
- Select the minimum position (MIN) using the steam and temperature control.
- Unplug the appliance to the mains.
- Remove the water from the water tank.
- Clean the appliance
Cleaning
- Disconnect the appliance from the mains and let it cool before undertaking
any cleaning task.
- Clean the equipment with a damp cloth with a few drops of washing-up liquid
and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach, or
abrasive products, for cleaning the appliance.
- Do not submerge the appliance in water or any other liquid, or place it under
a running tap.
Anomalies and repair
- Take the appliance to an authorised technical support service if problems
arise. Do not try to dismantle or repair without assistance, as this may be
dangerous.
For EU product versions and/or in the case that it is requested in your country:
Ecology and recyclability of the product
The materials used to make the packaging of this appliance are covered by a
system for collecting, classifying and recycling them. Should you wish to dispo-
se of them, use the appropriate public containers for each type of material.
The product does not contain concentrations of substances that could be
considered harmful to the environment
- This symbol means that in case you wish to dispose of the
product once its working life has ended, take it to an authorised
waste agent for the selective collection of waste electrical and
electronic equipment (WEEE)
- This symbol indicates that the surface may heat up during use.
This appliance complies with Directive 2006/95/EC on Low Voltage, with Di-
rective 2004/108/EC on Electromagnetic Compatibility, with Directive 2011/65/
EC on restrictions on the use of certain dangerous substances in electrical and
electronic appliances.
Manual Sensity NS.indb 7
21/07/15 15:58