RST OP-AWAC-KPR Manual De Instrucciones Y Ensamble página 3

ATTACH SEAT AND BACK TO LEG FRAME - Attach seat (B) and back (A) to leg frame
(C). For seat use bolts (E), barrel nuts (F), and allen wrench (I). For back use screws (D),
Step 1.
and allen wrench (I).
ATTENTION: Use bolt (G) as an extension to insert barrel nut (F) into the hole found
on seat (B). Screw the bolt into the top of the barrel nut. Once bolt (E) is secured
through the frame and into the barrel nut (F), remove bolt (G) from barrel nut (F).
2