Fein ALG80 Manual De Instrucciones página 14

en
14
Note:
If fully charged battery packs are inserted into the bat-
tery charger, the battery charger remains inactive and
the battery pack is not recognized by the my.FEIN app.
Please try inserting again once the battery pack is par-
tially discharged.
For battery packs with a production date prior to
01.01.2021, the serial number may occasionally be dis-
played incorrectly in the my.FEIN app. In this case, you
can only read out the current charge condition. Display-
ing the number of charging cycles of the inserted bat-
tery pack is not possible.
Repair and customer service.
Once per week; more often in case of frequent usage:
– Keep the contacts in the slide-on shoe clean.
– Only dry-clean electrical contacts.
– Ensure that metal chips do not enter the battery-
charger housing.
If the charger's power cord is damaged, it must be
replaced by a special power cord, available from the
manufacturer or their representative.
Warranty and liability.
The warranty for the product is valid in accordance
with the legal regulations in the country where it is mar-
keted. In addition, FEIN also provides a guarantee in
accordance with the FEIN manufacturer's warranty dec-
laration.
The delivery scope of your battery charger may include
only a part of the accessories described or shown in this
Instruction Manual.
Environmental protection, disposal.
Packaging, worn out battery chargers and accessories
should be sorted for environment-friendly recycling.
Dispose of batteries only when discharged.
For batteries that are not completely discharged, insu-
late the terminals with tape as a protective measure
against short-circuiting.