HumanTechnik signolux Guia De Inicio Rapido página 7

g) You can now position the transparent plastic face in such
a way until it has almost reached its final position. You
only have to carefully press the small pin (fig. 1 A) and to
lock the transparent plastic face in place.
4. Do not forget to register your doorbell-pushbutton to
your »signolux«-receivers!
a) Keep the function button of the according receiver pressed.
The event icons light up in sequence. Release the
button when the desired icon is lit.
b) Press the doorbell-pushbutton.
c) Wait for approx. 20 seconds and test the function.
5. Mounting the doorbell pushbutton
You can mount the doorbell pushbutton using the supplied
strips of double-sided tape. Take care to adhere it to a
smooth, dry and clean surface.
Important note:
Kindly keep in mind that metal parts and other building
materials may interfere with the transmission of the radio
signal. As they can be either visible or hidden at the
desired mounting location you should always carry out
a functional test at the mounting location before starting
the mounting process, and, if required, choose a different
mounting or installation location if the reception is not
guaranteed.
Technical data
Work range
Radio frequency
Range (open spaces)
HF capacity
Battery
Battery service life
(5 activations per day)
Dimensions (HxWxD)
Weight
This device complies to the following EC standards:
- 2011 / 65 / EC RoHS - Directive
- 2012 / 19 / EC WEEE - Directive
- 2014 / 53 / EC RED - Directive
Compliance with the directives listed above is confirmed by
the CE seal on the device. CE compliance declarations are
available on the Internet at
http://www.humantechnik.com/service
Technical specifications subject to change without prior notice.
-10 bis 40°C
868,35 MHz
up to 200 m
<10 mW
CR2032
18 months
41 x 90 x 23 mm
41 g
English 6