Troubleshooting - Bell console 500 Manual De Instrucciones

TROUBLESHOOTinG

PROBLEM
No Cadence Value
Inaccurate Cadence Value
Inaccurate maximum Speed
reading
No Speedometer reading
Incorrect Speedometer
Reading
Slow display response
No Trip Distance reading
Display shows irregular
figures or blank screen
Black Display
SOLUTION
Verify that the cadence sensor and cadence
magnet are aligned properly
Verify that the cadence sensor and cadence
magnet are aligned properly
Unknown atmospheric or RF interference
Reset Max speed
Improper magnet/transmitter alignment.
Check magnet/transmitter alignment and
verify that the wheel transmitter battery
is good.
RF interference from electromagnetic
sources such as electronics, florescent
lights, high voltage wires, telephone
lines,etc.
Temperature outside of operating limits
(32 – 125°F or 0 – 55°C)
Improper magnet/transmitter alignment.
Check magnet/transmitter alignment and
verify that the transmitter battery is good.
Re-install computer battery and verify that
the computer battery is good.
Temperature too hot or display exposed
to direct sunlight too long.