21"
(53.3 cm)
3-1/8"
(7.9 cm)
10-13/16" (27.5 cm)
1-1/4"
(3.2 cm)
3-1/2"
(8.9 cm)
Product Information
Applicable product:
Drop-in, 3-side integral flange, left drain
Drop-in, 3-side integral flange, right drain
Fixture*:
Bathing well:
Basin area, bottom
43" (109.2 cm) x 24-5/8" (62.5 cm)
Basin area, top
53-1/2" (135.9 cm) x 32-1/8" (81.6 cm)
Weight
110 lbs (50 kg)
To overflow:
Water depth
15" (38.1 cm)
Capacity
57 gal (215.9 L)
* Approximate measurements for comparison only.
Drop-in cut-out dimensions:
58-1/2" (148.6 cm) x 40-1/2" (102.9 cm)
Pump:
1-speed
Minimum access panel pump/control:
20" (50.8 cm) W x 15" (38.1 cm) H
1047167-1-C
60" (152.4 cm)
3/8" (1 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
K-1112-L
K-1112-R
V
Hz
120
60
required
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Recommended faucet area
Pump/Control Access
1-1/4" (3.2 cm)
19-1/2"
(49.5 cm)
21" (53.3 cm)
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
Locate the outlet behind the whirlpool and within 24" (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
50 lbs/square foot (242 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
A
7.5
2
1-1/4"
1-1/2"
(3.2 cm)
(3.8 cm)
Tile Flange
Drop-In Rim
Detail
Detail
42" (106.7 cm)
1-1/2" OD
120 V, 15 A, 60 Hz
Kohler Co.