Maintenance And Storage; Precautionary Measures - Mestra 080543 Manual Del Usuario

⑩ Turn off the front pressure switch and turn off
the cylinder switch on the front top plate. (The
sheet is fully seated on the model and comes
⑪ Rotate the lower sliding to the left (90°).
up.)
⑫ Remove the upper sliding and take out the
⑬ Turn off the heater switch on the front plate.
molded model.
C. Management
methods
① Disconnect the power cable from the outlet.
② After use, check the equipment is clean.
③ Do not place anything on the heater.
① Please keep out of reach of children.

Maintenance and storage

② Please use in a place separated from fire and
③ Temperature: -10~70 ℃
water.
④ Humidity: 10~100 %
⑤ Pressure: 50~106 kPa
① There is a risk of burns because the heater area

Precautionary measures

is heated after using this product. Do not touch
② Do not disassemble or repair this product. To
heater area after operation.
avoid electric shock, do not open the case.
③ After using this product, must remove the
Refer servicing to qualified personnel only.
④ Contact with sheet softening may cause sheet
power cable from outlet
⑤ Do not use for other purposes.
deformation and burns.
⑥ Avoid strong rays, although this vacuum
former has been
international EMI standards.
and storage
designed pursuant
Cleaning
Clean the product and each part with a soft cloth
and air.
Components
Symbols
① Power failure:
Fault coping method
② Heater failure:
③ Pressure failure: Check compressor, pressure
to
Bead case
Upper sliding
Power cable
Heater (On/OFF)
Cylinder (ON/OFF)
Pressure (ON/OFF)
Protective ground
Warning, attention
Caution, hot surface
Check
power switch.
Check heater switch, limit
switch, heater.
switch.
fuse and
7