Smith S103E Manual De Uso Y Cuidado página 3

Assemble Hose To Tank
1. Wrap teflon tape around tank fitting threads 2X in
clockwise direction, if needed.
2. Align hose and screw on to tank. (See Figure A).
3. Tighten with a 5/8" wrench. (See Figure B).
Assemble Hose, Extension, Shut-Off & Nozzle
1. Attach hose to shut-off and tighten securely using a 9/16" wrench. Do not overtighten. Use a 3/4" wrench
to hold the shut-off handle while tightening the hose. (See Figure C)
2. Install the extension onto the shut-off assembly and tighten the nut securely using a 13/16" wrench.
(See Figure C)
3. Install selected nozzle into the extension nut and tighten nut securely using a 13/16" wrench.
(See Figure C)
Used on
1. Industrial and Concrete Series (Orange)
ASSEMBLY INSTRUCTIONS
EXTENSION
SHUT-OFF
HOSE
BRASS ADJUSTABLE
FAN NOZZLE USES:
Used on
1. Industrial and Concrete Series (Orange)
BRASS FLAT FAN TIP
NOZZLE USES:
SPRAY SPRAY FLOW
ANGLE: PATTERN: RATE:
FAN .2 GPM
65°
FAN .2 GPM
80°
80° FAN .4 GPM
80° FAN
.5 GPM
95° FAN .5 GPM
110° FAN 1 GPM
Figure A
NOZZLE
NUT
Figure C
CERAMIC CONEJET TIP
NOZZLE USES:
Used on
1. Turf and Argiculture Series (Green)
2. Industrial and Concrete Series (Orange)
3. Cleaning and Restore Series (Blue)
4. Pest Control Series (White)
SPRAY SPRAY FLOW
RATE:
ANGLE: PATTERN:
.07 GPM
80° FAN
80° FAN .10 GPM
80° FAN .10 GPM
80°
FAN .13 GPM
80° FAN .20 GPM
Figure B
COLOR
#4 GREEN
#6 RED
#10 BLACK
#8 GRAY
#12 BROWN
Page 3