Using Your Jabra Bt110 Headset - Jabra BT110 Manual Del Usuario

3 2. Pairing
3. Set your Bluetooth phone to "discover" the Jabra BT110
on your phone
See example from a Sony Ericsson T610 in Fig. 3
4. Your phone will find the "Jabra BT110"
5. Enter passkey or PIN 4 = 0000 (4 zeros), then press "yes" or "ok"
6. If pairing was successful
7. If pairing was unsuccessful
4
After five minutes the solid yellow light will turn off automatically whether you have
T "discover" a Bluetooth device*. ( h e
The Jabra BT110 will always go into pairing mode whenever you insert / replace the The yellow light (LED) remains solid, and you'll need to re-attempt pairing. Follow your phone's instruction guide. This usually involves going to a "setup",
NOTE: It is only the first time you want to connect your BT110 with your mobile phone T h e
Fig. 3
www.jabra.com/fscs
p h
(connected) to your mobile phone. and then selecting the option to )
y e
3
2

Using your Jabra BT110 headset

o 2 n Tap once on the headset's answer/end button. . e
4. To make a call 1 5. Voice-dialing (if supported by phone) 6. Call reject You are now ready to use your Jabra BT110 headset. 7. Maximising battery life To reject an incoming call, press the answer / end button. The voice-dial function is activated with tap on the answer/end button. For further Tap the end button on your mobile phone or the answer/end button on your Press the answer button on your phone's keypad. You can subsequently transfer the The Jabra BT110 has been designed to give you the most talk time possible, up to Use the mobile phone's keypad to dial the number, and tap once on the answer / .
l 3. To end a call l o
T o t h
T o
w l
5
a e n n
a n
i g