Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
30 | English
Cause
No/unusual voltage in the
cable
Cable is too deep.
Cable runs in an earthed
metal pipe.
Measuring tool not earthed
Shielding building material or
humidity too low/too high
Maintenance and Service
Maintenance and Cleaning
Check the measuring tool before each use. If the measuring tool is visibly damaged
u
or parts have become loose inside the measuring tool, safe function can no longer be
ensured.
Always keep the measuring tool clean and dry to ensure optimum, safe operation.
Never immerse the measuring tool in water or other liquids.
Wipe off any dirt using a dry, soft cloth. Do not use any detergents or solvents.
After-Sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair of
your product as well as spare parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about
our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article
number given on the nameplate of the product.
1 609 92A 6H8 | (02.07.2021)
Corrective measures
Apply voltage to the cable, e.g. by turning on the corres-
ponding light switches. It is not possible to reliably de-
tect multi-phase electricity cables and cables with
voltages outside the 110−240 V and 50−60 Hz range.
The detection depth depends on the building material
and may be less than the maximum detection depth.
Select the <Metal> operating mode to detect metal
pipes.
Grip the measuring tool firmly without gloves. Do not
stand on insulating ladders or scaffolds. Do not wear in-
sulating footwear.
Detection will not be reliable in the presence of metallic
building materials or building materials that are too dry
or too damp (e.g. if the humidity is too low or too high).
Bosch Power Tools
Publicidad
Tabla de contenido
