Rock Shox BOXXER RACE Guía De Ajuste Rápido página 4

Idiomas disponibles

er race tuning guide

i n t r o d u c t i o n

There are three primary settings you can tune on your front suspension (fork). Keep in mind when tuning your fork to always tune these

settings in the following order:

1. Sag - Spring Tuning

2. Rebound Damping

3. Compression Damping

tHings you Will need For tuning

Safety glasses

2.5 and 4 mm hex wrenches

Gloves

24 mm socket wrench

Riding gear

Grease brush

A friend

Grease

s a g - s p r i n g t u n i n g

Sag is the amount the fork compresses when you are sitting on your bike while wearing your normal riding gear. It is Important to tune

the sag measurement of your fork because proper sag enhances the ability of the front wheel to follow the changing contours of the

terrain as you ride. Sag on your BoXXer fork should measure between 20 and 30 percent of maximum travel and is indicated by the

gradient marks on the drive side upper tube.

measuring sag

To measure sag, first adjust the compression damping features,

located at the top of the drive side fork leg, to their lightest settings.

To do this, turn each knob counter-clockwise (opposite the arrow

that reads "Hard") until it stops.

Have a friend securely hold your bike upright while you sit on the

bike, wearing your normal riding gear.