XX
Bo
er race tuning guide
c o i l s p r i n g t u n i n g
BoXXer coil spring forks offer several coil spring options, each identified with a unique color, to allow riders of different weights to tune
their forks with a proper sag measurement. Use the chart below as a guideline to determine the coil spring best suited for you. If the
coil spring in the chart is a different color than the one your currently have, you will need to change the coil spring.
important: When changing your coil spring we recommend you wear safety glasses and gloves.
rider WeigHt
spring color
<140 lb (63 kg)
140-160 lb (63-72 kg)
160-180 lb (72-81 kg)
180-200 lb (81-90 kg)
>200 (99 kg)
cHanging tHe coil spring
Use a 4 mm hex to loosen the upper crown bolt located on the
1
non-drive side fork leg. Do not remove the bolt.
Use a 24 mm socket wrench to loosen and remove the top cap
2
located on the non-drive side fork leg. Be careful not to damage the
top cap o-ring upon removal. If the top cap o-ring is damaged during
removal, you must replace it with a new o-ring.
6
Silver
Yellow
Red (Stock)
Blue
Black
1
2
Copyright © SRAM Corporation • 2009