The power socket must be easy to reach so the plug can be removed quickly in
case of emergency.
Do not place the fan on a shelf and/or near sinks or other container of liquids
(minimum distance of 2 meters) to avoid the risk of it falling in.
Keep the fan far away from fabrics (curtains, etc.) or unstable materials that
could obstruct the air intake grille; make sure that the front is free of unstable
materials (dust, etc.).
Make sure that the electric cord is not touching rough, hot or moving surfaces
and not twisted or wrapped around the appliance.
Stand the appliance on a horizontal, flat surface or table; do not stand on a
inclined plane (the appliance could upset).
Do not place the appliance near an open flame, cooking or other heating
appliance.
Wall installation
The appliance must only be used if secured to a wall: the wall must be flat,
smooth, very stable (as the appliance could tip over) and resistant.
Position the appliance far from other sources of heat, inflammable materials,
curtains, carpets, etc., inflammable gases or explosive materials (spray cans).
If the appliance is fitted to a wall, the same must be made of masonry and/ or of
resistant material (not of wood or synthetic material); follow the indications
below for installation:
- The wall fan must be installed at least 2 m above the floor (below picture)
- Fix three hooks to the wall (at a distance, below picture n.3), make the holes on
the wall, inserting the hooks into the slots provided with screws.
- Attach the appliance on the wall with three hooks; once completed, ensure the
fan is securely installed onto the wall.
11