SETTINGS
Set individual count-up time or countdown time
•
Press the up arrow for a count-up time, „down" for a countdown time. The
timer (00:00 or 99:59) is displayed.
•
Press EDIT to set the timer. When the digits are flashing, use the number
buttons on the remote control or the arrow buttons (right/left). Press EDIT
again to save the change or press EXIT to cancel editing the timer without
saving.
•
Press EDIT again, followed by entering a number from 1-9 or F7, F8, F9,
F10 or F11 (free memory) to assign your setting to a DeepL access key. A
beep indicates that the storage process was successful.
•
Press ENTER to trigger a 10-second countdown (if activated), which
counts up from 00:00 to 10:00 seconds. Afterwards, the count-up/
countdown time is counted at your set count-up/countdown time.
•
Press ENTER to start/stop/continue counting or RESET to cancel.
•
Recall the timer by pressing the selected DeepL access key.
Setting Individual Interval
•
Press INTERVAL on the remote control
•
Press EDIT. The timer displays the number of laps. Use the number
buttons on the remote control or the arrow buttons (right/left) to change
the number as desired.
EN
15