Tabla de contenido
Publicidad
Chopping Blade Assembly
Jeu de lame à hacher
Cuchillas para picar
G
USE
UTILISATION
USO
CAUTION: CHOPPING BLADE
ASSEMBLY IS NOT LOCKED IN
PLACE. IF USING THE POUR
SPOUT, ENSURE THE LID IS
FULLY LOCKED ONTO THE BLEND
AND PREP BOWL.
USING THE
USING THE CHOPPING BLADE ASSEMBLY:
CHOPPING BLADE
CAUTION: USE CAUTION WHEN HANDLING
THE CHOPPING BLADE ASSEMBLY THE
ASSEMBLY &
BLADES ARE VERY SHARP.
DOUGH BLADE
1
Holding the Chopping Blade Assembly by the
shaft, place it onto the drive gear (G) inside the
ASSEMBLY
Bowl. Ensure the attachment fits around the
gear shaft and that it is standing straight.
2
Add the ingredients and secure the Bowl lid
onto the Bowl.
3
Plug the power cord into the electrical outlet.
Once the Bowl is engaged, the programs
available for that attachment will illuminate.
Select the program desired based on your recipe.
The Auto-iQ
automatically at the end of the program.
4
When you have reached your desired consistency,
stop the appliance by pressing the START/STOP
button or selecting the program twice. Wait for
the Chopping Blade Assembly to stop turning.
1 2
H
DÉMONTAGE
EXTRACCIÓN
CAUTION: THE CHOPPING BLADE
ASSEMBLY IS NOT LOCKED
IN PLACE. IF POURING WITH
THE LID REMOVED, ALWAYS
REMOVE THE CHOPPING BLADE
ASSEMBLY FIRST.
REMOVAL:
5
6
7
USING THE DOUGH BLADE ASSEMBLY:
IMPORTANT:
Do not overfill or exceed. Motor may overheat.
1
program will stop the appliance
™
2
w w w . n i n j a k i t c h e n . c o m
®
I
J
REMOVAL
To remove the lid, press the release button on the
lid and pull the lid handle up to a 90° angle (H).
Turn the Bowl counter-clockwise and lift it to
remove it from the motor base (I).
To release the motor base from the counter or
tabletop, place your hands underneath both sides
of the motor base and gently pull the unit up and
toward you (J).
This makes 1 Lb. of dough at a time.
Holding the Dough Blade Assembly by the shaft,
place it onto the gear shaft inside the Bowl (K).
Ensure that the attachment fits around the gear
shaft and that it is standing straight.
Add the ingredients and secure the Bowl lid onto
the Bowl.
Dough Blade Assembly
Jeu de lame à pétrir
Cuchillas para amasar
K
USE
UTILISATION
USO
IMPORTANT: DO NOT
OVERFILL. TO AVOID SPILLING,
DO NOT ADD INGREDIENTS
PAST THE "MAX LIQUID" LINE.
3
Plug the power cord into the electrical outlet.
Press the START/STOP button to turn on the
unit. Once the Bowl is engaged, the programs
available for that attachment will illuminate.
Select LOW on the control panel and process until
ingredients come together to form a mass.
4
Once finished making the dough, stop the
appliance by pressing the START/STOP button
again or selecting the program twice. Wait for
the blade to stop turning.
WARNING: Remove utensils prior to
processing. Failure to remove may cause the
bowl to be damaged or to shatter, which may
cause personal injury.
Publicidad
Tabla de contenido
