Suzuki 57100-05881 Instrucciones Para El Montaje página 12

12/15
2. Pass the lead wire between the
ECM and the leg shield brace
and connect the lead wire to the
vehicle harness coupler located
in front of ECM.
3. Pass the grip heaters of right
and left sides and grip heater
switch lead wire (left side clamp
only) to the clamps of the vehi-
cle and fix the clamps securely.
Fix the clamps securely so
that there should be no ten-
sion in the lead wire when the
handlebar is turned to the
right and/or left.
Installation of Vehicle Parts
1. Install the vehicle parts in the
reverse order of removal.
NOTE: Install carefully the handle
GENUINE SUZUKI ACCESSORIES
CAUTION
front cover and the rear
cover so as not to pinch
the lead wire.
ECM
Leg shield
brace
Lead wire
Clamp
Coupler
Handle Handle
rear cover rear cover
Handle Handle
front cover front cover