Adjustment Mode / Check Alignment; The Adjustment Mode Is Finished - Fiessler RAZL-2CO Manual Del Usuario

People Counter RAZL-2CO (Translation)

6.2 Adjustment mode / Check alignment

The pillars are correctly aligned when the dimension of the cover from the left and from the right is approximately the same until the corresponding color
flashes. The cover template should be removed before checking the alignment.
Correct
Cover the reflector directly in front of the pillar slowly from the side as in
the pictures below until the traffic light flashes white.
If the traffic light already flashes white at minimum coverage, the
sensor pillar must still be turned slightly counterclockwise.

6.3 The adjustment mode is finished.

Traffic light
The sensor pillar is ready for person detection.
shines
The cover template must be removed after exiting the adjustment mode.
green
Fiessler Elektronik GmbH & Co. KG
Buchenteich 14, D-73773 Aichwald
The adjustment mode can now be terminated via the menu.
-31-
Phone: +49 (0)711 - 91 96 97 - 0
Fax: +49 (0) 711 - 91 96 97 - 50
Correct
Cover the reflector directly in front of the pillar slowly from the side as in
the pictures below until the traffic light flashes yellow.
If the traffic light is already flashing yellow at minimum coverage, the
sensor pillar must still be turned slightly clockwise.
Internet: http://fiessler.de
E-Mail: info@fiessler.de