Suzuki 990D0-23HSP-CRB Instrucciones De Instalación página 4

1. Park the motorcycle on a firm, flat surface where it will not fall over.
Preparation
2. Stop the engine and remove the ignition key, wait until the engine has cooled
for
down
installation
3. Read these instructions carefully before installation and check that all items
are correctly packed in the kit.
4. Take off driver seat (open with key).
5. Pull off both original under seat covers.
Installation: Align the Carbon under seat cover (1) so that the pins fit to the rubber
1.
grommets on the motorbike.
Press the Carbon under seat cover to its position
2.
Mount the driver seat on the motorbike.
3.
Check that all the screws are tightened before riding the motorcycle.
State of the art: 01/08
_______________________________________________ SUZUKI GENUINE ACCESSORIES
®
.
CAUTION