Rio PROLIFT Manual Del Usuario página 9

a.
b.
c.
IMPORTANT: Do not overstretch or pull
the headset down over the head, as this
will put undue stress on the headset.
7. POSITIONING THE HEADSET
a. Grip the headband where it meets the control unit and
hold behind the neck.
b. Slide the headset around the sides of the neck.
c. Lift over the jawline and place below the cheek bone.
NOTE: You may find it useful to use a mirror to ensure the
headset is correctly positioned
8. Increase the intensity level by pressing
the ON/UP button, until you feel a tingle.
M
NOTE: If you are using the headset
controls you must press the ON/
ON/UP OFF/DOWN
UP buttons on both the left and right
headset controls.
9. You may need to adjust the position
slightly to find the best contact point.
NOTE: Adjust the headset position
carefully as the unit will revert to the lowest
intensity level if contact with the skin
is broken.
9