One tread double brake
Orientation piece
3 - Installation of front armrest: Insert two ends of front armrest tube
into armrest receptacle until a click is heard to be installed in position. (Pay
attention to left and right direction).
(Fig. 3)
4 - Brake: One tread and double brake. As long as brake handle of any
side is treaded, the stroller can be braked on two sides at the same time.
To release the brake, the operation is in a reverse way.
(Fig. 4)
5 - Front wheel orientation: Lift orientation piece upward to make front
wheel oriented, easy for straight push and unlock in a reverse way.
(Fig. 5A 5B)
7 - Pedal adjustment : Hold onto end face on two sides of pedal,
overturn downward, thus, the pedal can be put down. If you hold onto
two sides and pull upward, the pedal can be propped up. (Fig. 7)
6 - Back rest adjustment: Hold onto the
back rest adjusting piece and back rest can
be adjusted upward and downward in three
positions. (Fig. 6)
JL-932 GB
9