Installation Instructions - Rule 4-H53SP Guía De Instrucciones

Installation Instructions

Attach standard garden hose to the pump
Determine the location for the pump on the pool cover.
Generally place the pump where the water would be the
deepest. The installation must allow for complete drainage of
the hose. All air/water pockets must be eliminated by having
the garden hose, once it has started running downwardly, run
level or continuously down There must be no loops or "sags"
in the hose that could trap air or water.
Note:
Restricting the flow from a Rule pump by using a smaller
pipe or hose size (such as a garden hose) does not damage
the pump, but will result in a reduction in flow. For maximum
flow, use the shortest length of the largest diameter hose
available.
1
.
2